Flow EZ™: Most advanced flow controller MFCS™-EX: Extended flow control

MFCS™-EZ: Microfluidic flow control system

MFCS™-EZ: Microfluidic flow control system

Unique pressure controller

  • Easy to install and use
  • Many automation possibilities
  • Fast and stable response
  • Field proven technology and superior quality
Flyer
MFCS-EZ pump for cell culture

Do you need more information?

 

  • Compact device (2dm3)
  • Wide controllable pressure ranges (from -800mbar to 7bar)
  • Achieve flow-rate ranges from sub nl/min to thousands of µL/min
  • Pulseless flow
  • High responsiveness
  • Intuitive User Interface
1.      Focus on your science, not the instrument

  • Straightforward connections to any microfluidic device
  • MAESFLO™ user experience for pressure control

 

 

 

 

 

 

 


2. Get superior results rapidly

  • Reach your targets out the blink of an eye
  • Get your experiment started instantaneously

 

 

 

 

 

 


3. Save benchtop space

  • Up to four independently controllable channels
  • Can provide negative or positive pressure at your convenience
  • No cross contamination as liquids only contact air

4. Let the MFCS™-EZ take care of your setup
  • Automate experiments with our powerful Script Module
  • Easy integration with any set-up using our Software Development Kit (SDK)

 

 

The MFCS™ operates over a wide pressure range, from -800mbar up to 7bar

MAESFLO™

  • User-friendly interface with intuitive data presentation
  • Instantaneous pressure and flow-rate monitoring (only with FRP)
  • Script Module included to automate your microfluidic experiments
  • Data recording
  • Pressure limit option to prevent any damage on your system
  • Customization available (name, unit, …)
  • And more…

 

 

FASTAB™ Microfluidic Patented Technology
  • Legacy microfluidic control systems such as syringe, peristaltic or piston pumps are poorly adapted to the manipulation of fluid volumes in the sub microliter range, leading to long equilibration times, irreproducibility and pulsation.
  • To solve this, Fluigent developed the patented FASTAB™ technology: a pressure driven technology that has no moving parts and includes an advanced feedback control algorithm to maintain precise pressure control.
  • Based on the FASTAB™ technology, the MFCS™ series are compatible with any microfluidic application, from simple droplet generation to organ-on-a-chip experiments.

Any questions ?

MFCS™ Series

How to set the manual regulator/ air drier/MFCS™-EZ all together?

This scheme represents a typical positive pressure network. For negative pressure network, please contact us at mailto:support@fluigent.com.

To learn how to connectg each part see our section on “Pressure Accessories”

Back to FAQs 1 0

How to run the MFCS™-EZ?

  • Connect the MFCS™-EZ as described on the previous question.
  • Connect the power supply and the USB cable to your computer.
  • Press the Play button.
  • Set the right inlet pressure on the display, according to the value written on the nameplate at the MFCS™-EZ back (below, the right value is 1300mbar).

  • Launch MAESFLO™ software

Back to FAQs 0 0

What pressuring gas can I use?

You can use non-corrosive, non-toxic or explosive gas (air, N2, Ar, CO2, …).

Back to FAQs 1 0

How to set the right value on the display?

  • The right value you have to set is written on the nameplate at the MFCS™-EZ back. In this example, it is 1300mbar

  • Turn the scroll wheel of the black manual regulator to adjust the pressure on the MFCS™-EZ display according to this value.

Back to FAQs 0 0

Green & Red LEDs alternatively blink: What do I have to do?

The inlet pressure is too high. You have to reduce the inlet pressure using the manual pressure regulator as advised on the nameplate of MFCS™-EZ.

Back to FAQs 0 0

The MFCS™-EZ does not turn on: What do I have to do?

Check you have well connected the power supply provided by Fluigent (24VDC). If the condition persists, please contact support@fluigent.com .

Back to FAQs 0 0

Red led does not turn on: What do I have to do?

It means there is no USB connection. Check the USB cable is well connected between the MFCS™-EZ and the computer. Check the USB ports are not in sleep mode or turned off. Besides, Fluigent strongly advises you to connect the USB cable directly, not with a USB hub.

Back to FAQs 0 0

Nothing is displayed on the LCD screen: What do I have to do?

Check you are using the power supply provided by Fluigent (24VDC). If the condition persists, please contact support@fluigent.com .

Back to FAQs 0 0

Abnormal pressure drops/variations when using the MFCS™-EZ i.e Inlet pressure is not stable: What do I have to do?

Check your local pressure network or your pump. The pressure source may not be stable enough. Also check that you have well connected the pressure line.

Back to FAQs 1 0

I cannot reach the requested output pressure: What do I have to do?

Back to FAQs 0 0

I have no pressure entering the MFCS™-EZ: What do I have to do?

Back to FAQs 0 0

f7f3d0d46c4be551e544ce07ed31c1edcccccccccccccccccccccccccc