Multiply the outputs
P-SWITCH
[ELUPSW2000]Pneumatic valve controller
The LineUp™ P-SWITCH is a pneumatic valve controller. By providing two pressure sources (any vacuum or pressure from -800 to +2000 mbar), each module is able to deliver one of the two provided pressures through 8 independent outlets. The module can be used to multiply the channel output number in the LineUp™ system or any other pressure system.
- Multiple
- Compact
Uses minimum bench space
- Adaptable
Use with or without a PC
- Intuitive
Straight forward set up & use
产品特点
可根据需要进行扩展
LineUp™系列模块可以组合使用,增加压力/真空通道、阀门控制,还能通过P-SWITCH将单个通道变成8个独立的插口。用4个模块将您的系统扩展至32个插口
压力和真空兼容性
每个P-SWITCH模块需要提供范围为-800 mbar至2bar的电源。与Flow EZ™和Push-Pull结合使用,设置一个多功能的压力式微流控实验系统。
可就地控制
使用LineUp™硬件接口,无需电脑即可控制和调节压力和流速。用户可通过P-SWITCH按钮快速切换压力/真空两个插口,从而专注实验。
并行储液瓶
将P-SWITCH的出口连接到独立的储液瓶上,以执行独立的注射。同时或独立给多达32个储液瓶加压。
启动气动阀
将P-SWITCH出口直接连至震动阀或芯片气动阀上以进行启动。无需额外管道,即可通过芯片控制和处理流体。
相关应用
无需电脑,专注显微镜下工作。
用户无需查看电脑,可在专注显微镜下工作的同时,单手调整控制盘。本设备可单独用于压力及流量控制、分液等工作,便于操作台使用。