Designed to help our customers to daily use our P-CAP with Eppendorf reservoirs of 2mL.
- P-CAP fitting 10-32 coned, for 1/16’’ OD tubing (x2)
- P-CAP Seal (x1)
- FEP Tubing 1/16” OD x 0.020” ID (0.5m)
All reservoirs, except the custom caps, can handle pressurization under 7bar.
Please be careful with the custom caps. For now, there is no bottle compatible with the custom caps having a pressure resistance equal to 7bar. Fluigent strongly advises you to use customs caps with pressure below 2bar only. If you still have questions, please contact Fluigent support at firstname.lastname@example.org.
Check you have not a pneumatic leakage due to a badly screwed fitting.
Check the O-ring is well positioned on the Fluiwell.
Many microfluidic applications require expensive solutions to be injected at a controlled flow-rate into a microfluidic system, such as cell cultures, PCR processes, cell injections or simulation of blood capillaries with a controlled minimal mechanical stress.
Because CTCs detection and labelling need a very precise and smooth flow control, Fluigent MFCS™ associated with the Flow-Rate Control Module and the ESS™ platform, was the designated choice to be able to efficiently control the flows of all the solutions and samples.
Many microfluidic applications require switching between multiple solutions (such as samples or buffers) while maintaining a constant flow-rate during the course of their experiment. In this application, one MFCS™-EZ pressure channel is connected via a manifold to ten separate vials containing different aqueous solutions.