skip to Main Content

MFCS™-EZ HIGH PRESSURE KIT

Designed to be used with any MFCS™-EZ with any high pressure channel, especially the 7bar pressure range.

  • MFCS-HP Red Plugs (x4)
  • MFCS-HP Back flow Filters (x4)
  • Tygon Tubing 40cm, OD: 4mm, ID: 2.5mm (x4)
icon questions

ANY QUESTIONS?

MFCS faq 1

This scheme represents a typical positive pressure network. For negative pressure network, please contact us at mailto:support@fluigent.com.

To learn how to connectg each part see our section on “Pressure Accessories”

Back to FAQs

You can use non-corrosive, non-toxic or explosive gas (air, N2, Ar, CO2, …).

Back to FAQs

Check your local pressure network or your pump. The pressure source may not be stable enough. Also check that you have well connected the pressure line.

Back to FAQs

RELATED APPLICATIONS

cell-aspiration

FLUID RECIRCULATION FOR CELL PERFUSION WITH REDUCED SHEAR STRESS

Many microfluidic applications require expensive solutions to be injected at a controlled flow-rate into a microfluidic system, such as cell cultures, PCR processes, cell injections or simulation of blood capillaries with a controlled minimal mechanical stress.

CTC-capture

AUTOMATED RARE CELLS CAPTURE AND LABELLING

Because CTCs detection and labelling need a very precise and smooth flow control, Fluigent MFCS™ associated with the Flow-Rate Control Module and the ESS™ platform, was the designated choice to be able to efficiently control the flows of all the solutions and samples.

micropipette-cell

SEQUENTIAL FLUID INJECTION & DELIVERY WITH PULSE-FREE FLOW

Many microfluidic applications require switching between multiple solutions (such as samples or buffers) while maintaining a constant flow-rate during the course of their experiment. In this application, one MFCS™-EZ pressure channel is connected via a manifold to ten separate vials containing different aqueous solutions.

RELATED PRODUCTS

Do you need more information?

Back To Top